Raising the fork tubes in the clamps

Know what your clickers do? Or want to know more.
This is the place for black magic!
Post Reply
User avatar
hairyone
Reactions:
Posts: 71
Joined: Tue Jan 09, 2024 3:27 pm
Location: Canberra

Raising the fork tubes in the clamps

Post by hairyone »

I've always done it ... Do people still?
Steep fork-geometry is more-direct.

I'm 5"9'. 10mm raised lowers my feet.
Be wary of 'tank-slap' @ high speed.

It's easily adjusted whilst on the trail.
I suggest people explore fork-height.

Edit: I always cut 30mm bar-width.
Increased fork-angle =same effort.

Edit2: I prefer the rear a bit soft too.
That kinda levels arse near ground.
Post Reply